There has been a problem with the file server. Perhaps you do not have the necessary privileges. Check with your network administrator.
A needed file is already in use or was left open.
You do not have the necessary privileges to access all of the files needed on the server. Contact your AppleShare administrator.
A disk error has occurred and installation cannot continue. Your disk may be damaged.
An AppleShare volume has unexpectedly disappeared and installation cannot be continued.
The Installer needs more memory to perform an installation. Try quitting other applications and running the Installer again. You could also try removing some system extensions and restarting to make more memory available.
A problem occurred with the AppleTalk network. Please quit the Installer, restart your Macintosh, and try running the Installer again.
A necessary file is locked. Installation cannot continue.
One of your disks is no longer available. Please quit the Installer, restart your Macintosh, and try running the Installer again.
The disk is locked.
There are too many files open on your Macintosh. Please quit the Installer, quit any other applications you may be running, and try again.
The selected disk is too full. Please quit the Installer and remove some files you no longer need.
Installation on “¥” was successful. If you are finished, click Quit to leave the Installer. If you wish to do additional installations, click Continue.
Removal from “¥” was successful. If you are finished, click Quit to leave the Installer. If you wish to do additional installations or removals, click Continue.
^0 cannot run on this model of Macintosh. Please contact your authorized Apple dealer and inquire about upgrading your hardware. Click Quit to leave the Installer.
The Installer document “^0” is unusable for installation. An error was detected before installation began. Make sure you are using the original Installer disks.
The Installer document “^0” is unusable for installation. The installation cannot be completed. The disk “¥” may not be a usable startup disk. Make sure you are using the original Installer disks.
There is something wrong with the selected disk “¥” . An error occurred before installation began. You may want to try installing on a different disk or Quit to exit the Installer.
There is not enough space on the disk “¥” to complete the installation (^0K needed, ^1K available). Quit the Installer, remove some items from the disk “¥”, and try again. Or try installing on another disk.
The file “^0” on “¥” does not meet the requirements specified by the Installer document “^1”. Installation cannot be completed. You may want to quit the Installer, remove “^0” and try again.
The file “^0” already on “¥” is more recent than what you are about to install. Click Continue to replace “^0” with the older version. Click Cancel to leave the disk “¥” untouched.
Installation was cancelled, leaving the disk “¥” untouched.
“^0” is the wrong disk. To finish the installation, click Continue and insert “^1”. To stop any further installation, click Stop.
There was nothing to remove from “¥”.
There are too many desk accessories on “¥” to complete this installation. Installation would result in ^0 desk accessories; only ^1 are allowed. Please quit the Installer, remove some desk accessories, and try again.
There were files missing on “¥” that are required for this installation. Quit the Installer and check your manual to see what is required.
The file “^0” is missing on “¥” but is required for this installation. Quit the Installer and check your manual to see how to get that file.
A file is missing from “¥” but is required for this installation. Quit the Installer and check your manual to see what files are required and how to get these files.
System Software is required for this installation but is not present on “¥”. Click OK, then install System Software before or as part of this installation.
Error occurred while writing the boot blocks. “¥” may not be a usable startup disk. (Error #^0)
Cannot overwrite a protected resource on the disk “¥”. Error detected before installation began.
Some of the files on the disk “^0” do not meet requirements specified by the Installer document “^1”. Installation cannot continue. The disk “¥” may not be a usable startup disk. Make sure you are using the original Installer disks.
The Installer found ^0 Installer documents on the disk “^1”. Please open the specific document you wish to use.
The file “^0” already on “¥” is newer than what you are about to install. Click Newer to keep the newer file, Older to replace that file, or Cancel to leave the disk “¥” untouched.
Error copying desk accessory onto “¥”. Installation cannot continue. The disk “¥” may not be a usable startup disk.
Installation was stopped before it was completed. The disk “¥” may not be a usable startup disk.
The Installer did not find any Installer documents and cannot run without one.
No installation was necessary on “¥”.
“^0” has the correct name but is not the correct disk. Click Continue, then try inserting a different disk with this name. Or click Stop to stop any further installation.
The file “^0” on disk “¥” cannot be replaced by the Installer. No installation will take place. Quit the Installer, move the file to another folder and try again.
This is not the correct “^0” disk. Make sure you are using the original Installer disks and try again. Click Continue if you have the correct disk to insert. Click Stop to stop any further installation.
The Installer document “^0” is damaged. Make sure you are using the original Installer disks and try again.
There's a problem with the source disk “^0”. Installation cannot continue. The disk “¥” may not be a usable startup disk. Make sure you are using the original Installer disks. (Error #^1)
There's a problem with the source disk “^0”. No installation can take place. Make sure you are using the original Installer disks. (Error #^1)
The Installer cannot copy the file “^0” onto the disk “¥”. Installation cannot continue. Please delete this file and try running the Installer again.
There's a problem with the disk “¥”. No installation can take place. (Error #^0)
An error occurred while reading the file “^0” on “^1”. Installation cannot continue. The disk “¥” may not be a usable startup disk. Make sure you are using the original Installer disks. (Error #^2)
An error occurred while reading the file “^0” on “^1”. No installation can take place. Make sure you are using the original Installer disks. (Error #^2)
An error occurred while reading or writing the file “^0” on “¥”. Installation cannot continue. The disk “¥” may not be a usable startup disk. (Error #^1)
An error occurred while reading or writing the file “^0” on “¥”. No installation can take place. (Error #^1)
Stopping now may result in an incomplete set of software on “¥”. Click Resume to continue the installation or Stop if you are sure you want to stop.
Installation on the active startup disk “¥” was successful. You must now restart your Macintosh to use your new software.
Installation on the active startup disk “¥” cannot take place while another application is running. Quit the Installer, then quit “^0”, and then try again.
Installation on the active startup disk “¥” cannot take place while other applications are running. Quit the Installer, then quit all running applications, and then try again.
Installation on the active startup disk “¥” cannot take place while other applications are running. Click Continue to automatically quit all other running applications. Click Cancel to leave the disk “¥” untouched.
There is not enough space on the active startup disk “¥” to do this installation (^0K available).
To install on the current startup disk you will need ^1K free. If you startup with a different disk, you will need ^2K free to install on “¥”.
An error occurred while installing on the active startup disk “¥”. Installation was cancelled, leaving the disk “¥” untouched.
An error occurred while installing on the active startup disk “¥”. “¥” may not be a usable startup disk. (Error #^0)
An error occurred while trying to complete the installation on “¥”. There may be problems with “¥”.
That disk is unreadable.
An error occurred while installing on the active startup disk “¥”. Installation was not able to be completed, but your original software has been restored.
The Installer needs to create a folder named “^0” on the disk “¥” but a file with this name already exists.
Please rename this file or move it to another folder.
The Installer needs to modify the file named “^0” on the disk “¥” but that file is locked. Please quit the Installer, unlock the file and try again.
Please wait while the Installer gets ready to continue…
Removal from the active startup disk “¥” was successful. You must now restart your Macintosh.
The Installer found an alias named “^0” but could not find the original Installer document to which this alias points. Make sure you are using the original Installer disks.
^0 cannot run on your version of Macintosh Software. Please restart your Macintosh using your original set of distribution disks. Click Quit to leave the Installer.
The file named “^0” on the disk “¥” is damaged and cannot be repaired by the Installer. Please quit the Installer, delete this file, and try again.
This copy of the Installer seems to be damaged. Make sure you are using the original Installer disks.
It is not possible to print an Installer document. Open this document to do an installation.
Problems were encountered installing onto the disk “¥”. Please quit the Installer, restart your Macintosh and try running the Installer again.
The Installer cannot be opened from this disk. Click Quit, then open a copy of the Installer from a disk that supports the hierarchical file system.
The files needed for this installation could not be found on your server volume “^0”. Please contact your network administrator about this problem.
An error occurred while removing from the active startup disk “¥”. Removal was not able to be completed, but your original software has been restored.
The Installer document “^0” requires version ^1 of the Installer application. Try opening the Installer application that is in the same folder as this Installer document.
The Installer tried to quit all other running applications, but this was cancelled. Therefore, installation was cancelled, leaving the disk “¥” untouched.
Dear Script Developer,
This version of Installer no longer supports installing font resources using the 'inra' script resource.
Please use the 'inff' script resource to install or remove font resources.
The file “^0” on the disk “¥” is too large to accommodate the installation. The installation cannot continue. Try removing “^0” and installing again.
